Bonair's Lift - who makes them - what parts work?
4 posters
Page 1 of 1
Bonair's Lift - who makes them - what parts work?
So does anyone know if the lifts in a Bonair are a generic type such as the Goshen - or did they make their own lifts - also if any other manufactures parts work. How many of you have the "safety" c channels that install over the lift arms like I keep hearing other manufactures have?
thevalleyboy- Posts : 6
Join date : 2009-01-20
Location : Calgary, Alberta, Canada
Re: Bonair's Lift - who makes them - what parts work?
You could go to a local metal worker and he / they will gladly make one costum for you for about $50.00 !
RickyBoy- Posts : 101
Join date : 2008-07-22
Re: Bonair's Lift - who makes them - what parts work?
Making oune should be simple - either out of wood - or possibly a metal framing stud and a few bends.... just wanted to get some discussions going.
thevalleyboy- Posts : 6
Join date : 2009-01-20
Location : Calgary, Alberta, Canada
RickyBoy- Posts : 101
Join date : 2008-07-22
Re: Bonair's Lift - who makes them - what parts work?
We had our lift system replaced, since there were problems with the pulleys, cables etc. Our mechanic did a custom job since Bonair made their own lifts & crank system, so it's hard to find generic parts that will work.
3littleducks- Posts : 2
Join date : 2009-03-22
Re: Bonair's Lift - who makes them - what parts work?
i made mine from aircraft cable from candian tire and used off the shelve clamps workes quite well
lurch- Posts : 8
Join date : 2009-12-30
Similar topics
» BA 700 Whole or parts
» Need a lift arm.
» Bonair parts....There is a God....
» 1979 Bonair BA1200 parts needed
» Crank up parts
» Need a lift arm.
» Bonair parts....There is a God....
» 1979 Bonair BA1200 parts needed
» Crank up parts
Page 1 of 1
Permissions in this forum:
You cannot reply to topics in this forum
|
|